Home > News > Content
Slitting Machine Structure Advantage
Aug 01, 2018

The middle part of the paper tube slitting machine is equipped with a spindle for processing a paper tube. The front end of the spindle is fixed on the base by a set of bearings, and a pulley is installed in the middle of a set of bearings; a compression cylinder is installed at a position close to the base, and the support of the cylinder A set of support rod bearings are mounted on the upper end of the rod to support the main shaft.

A main cutter shaft is mounted on the upper end of the paper tube slitter, and a plurality of blades are arranged thereon, and arranged according to a certain gap; a support frame of the main cutter shaft is further disposed at the top of the paper tube slitter, and the support frame is A supporting cylinder is installed in the middle.

The structural advantages of the paper tube slitting machine fill the blank of the automatic pipe cutting machine technology.

principle

1. The paper slitting machine shall carry out fixed length slitting processing of the whole roll or whole raw materials, such as plastic packaging materials, packaging cartons, steel plates, film, leather, wood chips, etc., and the fixed length slitting control shall be used.

2. The slitting length can be set continuously. If there is an error in the actual slitting length, it is easy to calibrate by setting parameters.

3. The slitting control of the paper slitter is divided into static and dynamic slitting: it stops accurately when the set length arrives, then static slitting processing, restarts after slitting; when the set length arrives, it does not stop. The slitting signal is dynamically slitted during the material movement process.


Related News

Learn More Information About Our Products Know More
Copyright © Wenzhou Daba Machinery Co.,Ltd All Rights Reserved.