Coating machine drive parts wear
During the operation of the coater, the wear of the transmission part often occurs, such as the wear of the dryer shaft of the coater and the wear of the bearing chamber of the roll paper. The traditional repair methods include surfacing, thermal spraying, brush plating, etc., but all have certain drawbacks: surfacing will cause the surface of the part to reach a very high temperature, causing deformation or cracking, and in severe cases, the shaft will be broken; electroplating Not too thick, and the pollution is serious, and the application is also limited. The material has good adhesion and compressive strength, and can be used to repair the wear of the coater without disassembly. At the same time, because of its metal-deficient concession, it can absorb the shock vibration of the equipment and avoid secondary wear.
Coater concrete foundation damage
Due to corrosion, aging, equipment vibration and other factors, the coating machine will also cause damage to the concrete base and other parts, resulting in loosening of the bolts of the fastening equipment, which seriously affects production. The traditional concrete pouring method will make the repair time greatly prolonged, which is difficult for enterprises to accept.
ADDRESS:Qianbu Industrial Zone, Xincheng Street, Ruian City, Wenzhou, China
Please fill in your mailbox information